The start button on a KitchenAid dishwasher is unresponsive. A KitchenAid dishwasher is considered a highly valuable home appliance. Despite their reputation for durability and effective performance, KitchenAid dishwashers can encounter occasional issues, particularly related to the proper functioning of the control and start buttons.
Your KitchenAid dishwasher may fail to load or start for several reasons. One possibility is that it has entered a sleep mode with a delayed wash cycle selected. To resolve this, you'll need to reset the dishwasher's power.
Hence, if the power switch on your KitchenAid dishwasher isn't working, it's advisable to follow the diagnostic steps provided below.
Kitchenaid Dishwasher Start Button Not Working?
Control Lock has been activated
If you press the start button and nothing occurs, it's essential to check the status of the control lock. If the control lock is engaged, it needs to be deactivated promptly.
To disable the control lock mode, press and hold the power button for a duration of four to five seconds. This action will turn off the control lock or collision feature.
Pay close attention to the red control indicator located near the control board's buttons. As you deactivate it, the indicator may flash three times, indicating a successful operation. Once the light goes out, you can proceed to initiate a new dishwasher wash cycle as usual.
Sleep Mode has been activated
Pressing the power button on your KitchenAid dishwasher can activate sleep mode, preventing it from functioning.
When using your KitchenAid dishwasher, make sure it's not in sleep mode.
Keep in mind that if sleep mode is enabled, the dishwasher won't start right away unless there's a continuous supply of freshwater connected and active at all times.
Activation of Delayed Wash
Another common reason for the start button not working is the accidental activation of the delayed wash option, either by a child or inadvertently, causing the KitchenAid dishwasher to pause before starting.
To disable the delay wash function, press the stop button after setting the desired delay time. This will allow the dishwasher to function when you press the power key.
Kitchenaid Dishwasher Control Panel Not Working
To reset the control panel settings, including high temperature and drying options, when simply removing and reconnecting the device doesn't resolve the issue and you can't run a cycle effectively, follow these steps:
- Ensure that the machine cover is securely closed and locked.
- Press the "Hi-temp Wash" and "Power Saving Drying" buttons individually, and press each of them at least six times.
- Allow the device to rest for 10 minutes to complete the resetting process.
- To finalize the resetting, press the "Drain" or "Stop" button, which will initiate a draining cycle. Allow this process to finish before opening the dishwasher.
Door hasn’t been properly closed
If the lid on your KitchenAid dishwasher is not completely sealed, the power button will not function until the panel is fully closed. It's essential to ensure that the lid is securely shut.
Sometimes, the bottom shelf in your KitchenAid dishwasher may be placed in a reversed position, causing the lid to lock improperly and resulting in an incomplete seal. This can also prevent the dishwasher from operating correctly, so double-check the placement of the bottom shelf to ensure proper sealing.
Pros and Cons of KitchenAid dishwasher
Pros
- High-Quality Build
- Effective Cleaning
- Quiet Operation
- Variety of Models
Cons
- Price
- Limited Features on Lower-Tier Models
- Repair Costs
- Size and Installation
Differences Between kitchenAid Dishwasher and GE Dishwasher
KitchenAid
KitchenAid dishwashers are known for their quiet operation, often with noise levels that are among the lowest in the industry.
GE
GE dishwashers vary in noise levels, with some models offering quiet operation and others falling within the average noise range.
Alternative to kitchenaid Dishwasher
Bosch
Bosch dishwashers are known for their reliability, quiet operation, and energy efficiency. They offer a range of models with various features, including adjustable racks and specialized wash cycles.
Water supply has not been switched ON
Many individuals overlook turning on the water supply when starting the dishwasher. Regardless of how long you hold down the power button, the dishwasher won't commence its cycle until the water supply is activated.
If you're uncertain about how to operate the water supply or need guidance, consult your device's user manual for instructions.
If you continue to experience issues with the power button despite ensuring the water supply is on, you have the option to replace it with a different control board or a touchscreen.
Electricity Problems
Ensure that the dishwasher is powered on and that the electrical cord is properly connected to the electricity source. In cases of electrical surges or spikes, the dishwasher's functionality may be affected.
If the dishwasher is not operating, it could be due to a lack of connection or a tripped fuse box. Verify that the dishwasher is correctly plugged in and that none of the fuses have been blown or damaged.
Timer that is not working correctly
The timer in your dishwasher plays a crucial role in its operation as it ensures that energy flows to the appropriate components at the correct times.
If the timer is malfunctioning or broken, it can disrupt the power supply to the dishwasher, preventing it from starting. It's worth noting that timers can sometimes be misunderstood, so when troubleshooting and considering replacing the timer, also inspect other commonly faulty components or equipment.
Conclusion
In conclusion, when facing the issue of a KitchenAid dishwasher start button not working, it's important to consider a variety of potential causes and solutions. We've explored several common reasons behind this problem, such as control locks, delayed wash options, and issues with the water supply or electrical connections. Troubleshooting these factors and following the recommended steps can often help resolve the start button's unresponsiveness.
However, if the problem persists despite these efforts, it may be necessary to explore more advanced solutions, such as resetting the control panel or seeking professional assistance from KitchenAid's customer service department. Ultimately, understanding and addressing the factors contributing to the start button issue can help ensure the smooth and efficient operation of your KitchenAid dishwasher, a valuable appliance in any home.
My name is Wisdom Bassey, I’m a blog content writer and graphic designer who provides support and services for brands and different companies. I’m young and versatile, A tech enthusiast. I carry out deep research on every topic I choose to write about. You can reach me through my social media handles, I’m always available and ready to connect.
The content is intended to augment, not replace, information provided by your clinician. It is not intended nor implied to be a substitute for professional medical advice. Reading this information does not create or replace a doctor-patient relationship or consultation. If required, please contact your doctor or other health care provider to assist you to interpret any of this information, or in applying the information to your individual needs.