Amana Washer not Filling

If you encounter problems with your Amana washing machine, begin by turning off the power and verifying the operational status of the water inlet valve and pressure switches.

A malfunction in either of these components can impact the water intake. If you're experiencing temperature-related problems, assess both your home's water supply and the water supply line connected to the unit.

Is Amana Washer’s water pressure sufficient?

Your washing machine necessitates a specific water pressure level to function effectively. If your water pressure falls below 20 psi (pound-force per square inch), you are likely to encounter operational issues with your washer.

Low water pressure can result from household water consumption or a valve obstruction. Reduced water pressure will extend the time it takes for your washer to fill, and in cases of extremely low pressure, it may appear as though the washer isn't filling at all.

Furthermore, when the pressure is too low, the valve might become stuck in the open position after a cycle, permitting water to seep into the machine when it's not in use.

How to Check Your Water Pressure

Prior to commencing any testing, it's crucial to confirm that all the faucets in your home are turned off. There should be no running water elsewhere that could interfere with the accuracy of your tests. Once you've ensured this, consider the following steps:

1. Verify the water valve status: Locate your water metre and confirm that the main shut-off valve is in the open position.
2. Check for potential pipe blockages: If you're experiencing low water pressure throughout your home, it may indicate a more significant issue.
3. Consider your location: Living in an area with naturally low water pressure, such as hillside homes, can lead to pressure drops, especially if they are distant from the water mains.

If you wish to assess the water pressure in your washing machine, you'll need a water pressure gauge. This gauge can be connected to the hose at the rear of your machine and will provide you with a measurement of the water pressure.

To do this, follow these steps:

1. Ensure the water is turned off before locating the cold water supply for your washing machine.
2. Carefully disconnect the hose and attach the water pressure gauge securely.
3. Once the gauge is in place, turn the water back on and take note of the psi reading displayed on the gauge's screen.

Pros and Cons of Amana Washer

Pros

• Affordability
• Simplicity
• Decent Performance
• Durability

Cons

• Limited Features
• Energy Efficiency
• Noise Level
• Build Quality

Differences Between Amana Washer and Maytag Dryers

Amana Washers

Amana is known for offering affordable and straightforward appliances. Their washers often prioritise simplicity and budget-friendly options.

Maytag Dryers

Maytag is recognised for manufacturing durable and dependable appliances. Maytag dryers, in particular, are known for their reliability.

Alternative to Amana Washer

Whirlpool

Whirlpool offers a diverse selection of washing machines known for their quality and reliability. They provide a range of models with various features and price ranges to suit different needs.

Read Also: Whirlpool Dishwasher not starting lights blinking

Is the Amana washer’s water inlet valve working correctly?

The water inlet valve plays a pivotal role in initiating and halting the water flow to your washing machine. A malfunction in this valve can result in either the failure to fill with water or continuous filling even when the machine is not in use. Low water pressure can directly impact the performance of this valve.

Additionally, this valve is responsible for regulating the flow of both hot and cold water to your washing machine. If you're experiencing difficulties with maintaining the right water temperatures during the wash cycles, the issue might also stem from this component.

If you have already inspected the water pressure and found no abnormalities, it is highly probable that the problem lies with the valve itself.

How to Check Your Water Inlet Valve

The water inlet valve in your washing machine features two ports that connect to the hot and cold water hoses. Each hose and port is equipped with its own solenoid valve, which receives electronic signals to control the opening and closing of the valves based on the selected wash cycle.

Before inspecting the valve, it's essential to disconnect both the power and water supplies. Unplug your washer and ensure the power switch is in the off position. With both hot and cold water supplies turned off, disconnect the hoses and place their loose ends in a bucket to catch any remaining water. At this point, you can turn the water back on to confirm that water flows through each hose.

Next, examine the filter screen, as it's common for it to become blocked over years of use and could be the root cause of your issues. Additionally, use a flashlight to inspect the hoses themselves for any potential obstructions.

If you can't identify any blockages on the screen or hose ends, you can proceed to test the solenoid valves. The video provided below offers a detailed guide on what to look for and how to test these valves.

As shown in the video, you'll need to remove the valve from the machine and disconnect any hoses or wires (be sure to label anything you remove for easier reassembly). Using a multimeter, you can verify whether the valves are in working order. A functional valve will yield a reading between 500 and 1500. If the valve is not working, the reading will be zero.

What You Can Do

Begin by cleaning the valve screen and inspecting the hoses for potential obstructions. If one of the hoses is blocked, it could result in your machine being unable to fill with hot or cold water.

However, if your testing reveals that the water inlet valve is indeed malfunctioning, you should search for replacement valves specific to your washing machine's brand. These replacement valves can be installed in the same manner as the damaged ones, using the existing connections and hoses.

Is Amana's washer’s pressure switch working?

The pressure switch is typically located at the top of the washing machine and plays a crucial role in determining when and how much water the machine should fill with. It also monitors the different cycles and when the machine should initiate the emptying process.

As your machine fills with water, the pressure switch registers the cycle and starts functioning accordingly. It then detects when the machine is empty and triggers the spin cycle. Common problems with the pressure switch, its associated hose, and the chamber can lead to issues where the machine either fills with too much water or not enough.

How to Check Your Pressure Switch

Accumulation of detergent in the hose can lead to your machine overfilling, and damage to the hose can result in inaccurate readings. This, in turn, can cause your machine to either continuously fill with water or not fill at all due to the pressure switch receiving incorrect information.

To address this issue, follow these steps:

1. Locate the hose connected to your machine and disconnect it.
2. Blow through the hose to check for any obstructions or damaged areas. Damage can occur from moving the machine or due to wear and tear as it comes into contact with other machine components over time.

What You Can Do

You can assess the pressure switch using the same multimeter that was employed for testing the valve. The video provided below offers guidance on locating both the hose and pressure switch on a top-loading Amana washer:

By taking readings with the multimeter, you can determine whether the pressure switch is in good working condition or if it needs to be replaced. If the readings indicate a poor connection, this could be the underlying cause of the overfilling or failure to fill your washer.

Conclusion

Troubleshooting and addressing issues with your washing machine's water intake and pressure control are crucial for its proper operation. Problems related to water pressure, the water inlet valve, and the pressure switch can lead to issues like overfilling or inadequate filling.

Regular maintenance, such as cleaning the valve screen and inspecting hoses for blockages, can help prevent these problems.

If you encounter issues that persist, performing tests with a multimeter and possibly replacing faulty components like the water inlet valve or pressure switch can restore your washing machine to optimal functionality.

It's essential to follow safety procedures, consult your machine's user manual, or seek professional assistance if needed to ensure safe and effective troubleshooting and repairs.