Whirlpool refrigerator water filters should be changed every six months. If you wait longer than this, the refrigerator water may develop an unusual taste, become cloudy, emit odorous ice, and possibly contain black particles. An overdue water filter replacement can also impact water flow, causing a slow trickle and smaller ice cubes.
Replacing the water filter in your Whirlpool refrigerator is a straightforward process that doesn't require any special tools or expertise. However, it's crucial to select the right replacement filter that matches your refrigerator model. Installing the incorrect filter is likely to result in a mismatch with your refrigerator's water line. To ensure you get the correct replacement filter, look for the part number printed on the old filter.
Step 1: Locate Your Water Filter
The placement of the water filter in your Whirlpool refrigerator is contingent upon the particular model you own. Depending on the model, you will find the water filter either situated in the lower grille at the refrigerator's base or positioned inside the upper right rear corner of the refrigerator's interior. If you're having trouble locating it, consult your refrigerator's manual to determine the exact location of the water filter.
Step 2: Preparation
When you're replacing the water filter, there may be a slight water spillage, so it's a good idea to place a towel beneath it beforehand. If the filter is located inside the refrigerator, consider removing any food or drinks that might obstruct access.
For refrigerators equipped with an ice maker, it's advisable to turn off the ice maker during the water filter replacement to prevent any potential spillage when it produces ice while the filter is being changed. In some older models, you might need to manually turn off the refrigerator's water supply before replacing the filter to avoid spills. However, in most modern refrigerators, this step is unnecessary as the water supply automatically shuts off when you remove the filter. Changing the water filter typically does not require access to any electrical components, making it safe to do without disconnecting the power.
Pros and Cons of Whirlpool
Pros
- Wide Range of Products
- Reliability
- Innovative Features
- Energy Efficiency
Cons
- Price
- Availability of Parts
- Customer Service
- Complexity
Differences Between Whirlpool and GE
Whirlpool
Whirlpool offers a broad range of home appliances, including refrigerators, washing machines, dryers, dishwashers, ovens, and more. They have a reputation for catering to various consumer needs with innovative solutions.
GE
GE also offers a wide array of home appliances, spanning kitchen appliances, laundry appliances, and more. Additionally, GE has a line of "smart" appliances that integrate with home automation systems.
Alternative to Whirlpool
Frigidaire
Frigidaire is known for producing affordable and functional appliances. They offer a range of products, from refrigerators to stoves and laundry machines.
Step 3: Remove the Water Filter
If your refrigerator's water filter is located in the grille, you can usually release the old filter by firmly pressing the button positioned to the left of the filter. If your refrigerator model lacks a push button, you can rotate the filter a quarter turn counterclockwise to release it. Depending on the model, you might also need to push inward on the filter while turning it to release it.
When the water filter is situated inside the refrigerator, it typically has a cover. To access the filter, you'll need to either release a tab to lower the water filter cover, lift the cover, or push on it. Once you've gained access, pushing and/or turning the old filter counterclockwise should detach it from the refrigerator.
After releasing it, you should be able to pull the old water filter out of the refrigerator. If you encounter difficulty removing the filter, try pressing the release button more firmly, as sometimes it can stick, and apply more pressure when turning the filter.
Step 4: Install the New Filter
In most Whirlpool refrigerators where the water filter is situated in the grille, there's a color-coded cap that needs to be unscrewed from the old filter and attached to the new one. If your filter falls into this category, ensure you've transferred the cap to the new water filter before proceeding.
The installation of the new water filter should be straightforward. Replace the old filter with the new one by sliding it into the designated water filter slot. Depending on your model, you may either need to turn the new filter clockwise or push it straight in until it clicks into place. Ensure that the new filter is installed in the same orientation as the previous one. If the water filter has arrows on it, align them correctly when installing the new filter.
Step 5: Flush Out the System
Before consuming the water, it's essential to run water through the system to cleanse it and eliminate any carbon particles and trapped air. Whirlpool advises running four gallons of water through the system after replacing the filter. If you have a one-gallon jug, fill and empty it four times.
Once you've flushed the system thoroughly, you can now savor a refreshing glass of freshly filtered water. If your refrigerator is equipped with a "change filter" indicator light, press the refrigerator button to reset it. If you had previously turned off the water supply before installing the filter, don't forget to turn it back on now that the new filter is in place.
Conclusion
In conclusion, changing the water filter in your Whirlpool refrigerator is a straightforward process that ensures the quality and taste of the water and ice it dispenses. Regularly replacing the filter, typically recommended every six months, helps maintain water purity and prevents issues like unusual taste, murky water, and ice odors. Remember to consult your refrigerator's manual to locate the filter and follow the specific instructions for your model.
While the steps may vary depending on the location of the filter, whether in the grille or inside the refrigerator, the process generally involves releasing the old filter, transferring any necessary components like color-coded caps, and installing the new filter correctly. It's also crucial to flush the system by running several gallons of water through it after installation to ensure the removal of any carbon fines and trapped air.
By following these simple guidelines and resetting the filter indicator if your refrigerator has one, you can enjoy clean, fresh, and healthy water from your Whirlpool refrigerator. Regular maintenance of your water filter not only enhances the taste of your water but also contributes to the overall well-being of your appliance. So, don't forget to replace your water filter on schedule to keep your Whirlpool refrigerator running smoothly and your water crisp and refreshing.
My name is Wisdom Bassey, I’m a blog content writer and graphic designer who provides support and services for brands and different companies. I’m young and versatile, A tech enthusiast. I carry out deep research on every topic I choose to write about. You can reach me through my social media handles, I’m always available and ready to connect.
The content is intended to augment, not replace, information provided by your clinician. It is not intended nor implied to be a substitute for professional medical advice. Reading this information does not create or replace a doctor-patient relationship or consultation. If required, please contact your doctor or other health care provider to assist you to interpret any of this information, or in applying the information to your individual needs.