Washer Fills but Won't Agitate

In top-loading washing machines, the agitator's primary function is to move the clothing items within the water and detergent, and it is powered by the output shaft of the transmission. The output shaft typically features splines, and the centre of the plastic agitator is equipped with corresponding splines to ensure a secure connection. Depending on the brand, the agitator can be a single-piece unit or a two-piece dual-action agitator.

To examine the agitator in a washing machine, follow these steps:

1. Disconnect the washing machine from its power source.
2. Depending on your model, either remove the fabric softener dispenser or lift the top cover to access the agitator. Try to manually rotate the agitator; you should encounter some resistance due to the splined connection.
3. Take out the agitator from the machine for a closer inspection. Most agitators are secured by a bolt that screws into the top of the transmission shaft. Some models may employ a small set screw in the agitator's barrel just above its base, while others use a rubber O-ring to ensure a snug fit.
4. If you notice any signs of wear or damage on the agitator, especially on the splines, or if you find that it offers little to no resistance when manually turned, it's time to replace the agitator.

Agitator Coupler, Cap and Bolt

Certain models of top-loading washing machines incorporate a coupler between the transmission shaft and the agitator. This drive coupler possesses splines on the inside to align with the transmission and splines on the outside to match the agitator. If your washing machine produces a grinding noise during the wash cycle and the agitator turns freely, it's possible that the drive coupling is damaged.

Here's how to examine the agitator coupler in a washing machine:

1. Prior to starting, disconnect your washing machine from the power source.
2. To access the agitator coupler, you'll need to first remove either the fabric softener dispenser or the top cover, depending on your specific model. Afterwards, you must remove the agitator.
3. Unscrew the bolt securing the coupler to the transmission shaft to detach the coupler from the appliance. Inspect the coupler for any indications of cracking, damage, burning, rust, or wear.
4. If you observe any of the aforementioned issues, you will need a replacement agitator coupler.

Read Also:

• Amana Washer not Filling
• Maytag Bravos Xl Washer Lid Lock Problems
• Samsung Washer D5 Code

Direct Drive Motor Coupling

Certain top-loading washing machines utilise a direct drive motor coupling to transmit power from the motor to the transmission. This drive coupling serves to connect the motor with the transmission and consists of two plastic drive forks with a rubber coupling in between. One of the drive forks is affixed to the drive motor shaft, while the other is attached to the transmission input shaft.

The rubber coupling absorbs torque as the motor shaft rotates, preventing the drive forks from breaking. Over time, regular usage can lead to wear on the coupling, and eventually, the drive forks may slip and fail to engage the transmission and clutch. A common indication of a failing motor coupling is that the washing machine fills and drains as usual but fails to agitate or spin.

To inspect the direct drive motor coupling in a washing machine, follow these steps:

1. Begin by disconnecting your appliance from its power source.
2. Locate and remove the motor coupling for inspection. Accessing it may require opening the washer's cabinet, and depending on your specific model, you might also need to remove the drain pump and/or motor.
3. Once you have removed it, carefully examine the coupling for any signs of damage, wear, or cracking.
4. If you identify any of the symptoms mentioned above, you will need a replacement direct drive motor coupling.

Read Also: Whirlpool Dishwasher not starting lights blinking

Pros and Cons of Washer

Pros

• Convenience
• Efficiency
• Consistency
• Time-Saving

Cons

• Cost
• Space
• Maintenance
• Environmental Impact

Differences Between Washers and Dryers

Washer

A washer, whether a top-loading or front-loading machine, is used to clean dirty clothes and other fabrics by agitating them in a water and detergent solution. It removes stains, dirt, and odours from the garments.

Dryer

A dryer, on the other hand, is designed to remove moisture from washed clothes and fabrics. It uses heat and air circulation to evaporate the water, leaving the items dry and ready to wear or store.

Alternative to washer

Hand Washing

Washing clothes by hand is the most basic and traditional method. It requires a tub or basin, water, detergent, and some physical effort. Hand washing can be effective for small loads or delicate items but may be time-consuming and physically demanding for larger loads.

Drive Belt

Certain top-loading washing machine models are equipped with a belt to drive the transmission. When the washing machine ceases to agitate, the drive belt might be the culprit.

To determine if the drive belt in a washing machine requires replacement, follow these steps:

1. Unplug your washing machine for safety.
2. Remove the cabinet or access panel to access the drive belt.
3. The drive belt is typically connected to the drive motor and can be taken off by disconnecting the clamps that secure it in place.
4. Conduct a visual inspection of your drive belt. Examine it for any indications of damage, wear, fraying, or burning.
5. If you notice any of the symptoms mentioned above, it's time to acquire a replacement drive belt.