When your new Samsung dryer is not generating enough heat or isn't heating at all, there are often simple solutions to the problem. Instead of immediately contacting a technician, you can attempt some basic fixes.
These include turning off the Eco Dry feature, cleaning the lint trap, conducting a vent test, and checking the power and gas sources. This wikiHow guide will address the most common causes for your Samsung dryer's lack of heat, provide useful troubleshooting tips, and assist you in restoring your dryer's functionality.
what to do if your new Samsung dryer is not heating
Eco Dry might be on
Eco Dry is a feature designed to save energy in Samsung dryers, but it can result in certain cycles running without heat. This can be a bit disconcerting, as you might open the dryer door and find your laundry cooler than expected. Moreover, since Eco Dry is often enabled by default in many new Samsung dryers, you might not even be aware that it's active, leading you to think your dryer isn't working properly.
To determine if Eco Dry is the reason your dryer isn't producing heat, follow these steps:
- Start a drying cycle on your Samsung dryer.
- Look for a light on the "Eco Dry" button. If the light is on, it means Eco Dry is active.
- Press the "Eco Dry" button to deactivate it.
Please note that on many newer Samsung dryers equipped with Eco Dry, you'll need to manually turn off this feature each time if you want to avoid heat-free cycles. Keep in mind that this will consume more energy, but it will ensure that your dryer provides heat during every cycle.
Similarly, if you notice your dryer continues to tumble without heat at the end of a drying cycle, it's likely because the wrinkle-prevention mode is enabled. This mode adds a heat-free cycle to minimise wrinkles in your laundry. If you prefer to have heat during the entire cycle, you may need to disable the wrinkle-prevention mode.
Check for error codes or blinking lights.
When your Samsung dryer is spinning but not heating, it's a good idea to check for error codes or blinking light patterns on models without digital displays. These indicators can provide valuable information about the issue. Here are some common error codes and blink patterns that you might encounter:
Error Codes:
- 9C1, 9E, 2E, 9E1, FC, FE, and 1 FC: These error codes typically indicate that the dryer is not receiving sufficient power. Ensure that the dryer is directly plugged into a 240V outlet and not connected through an extension cord.
- tS, t5, tC, tO, t0, tE, tE3, tC5, tCS, 1 tC, 1 tC5, 1 tCS: These error codes relate to temperature issues and often signal that the lint filter or exhaust vent is clogged. Check for blockages and clear them to resolve the problem.
- HC, HC4, 1 HC: These codes may appear when the dryer gets too hot or when it cannot reach the required temperature due to insufficient power.
- HC2: If your Samsung dryer uses gas for heating, this error indicates a problem with the gas ignition. Try turning the dryer off for 3 minutes and then back on, which might resolve the issue.
- oD or hE: These codes suggest a malfunction with the internal heat sensor. If you encounter these errors, it's advisable to contact Samsung or a licenced repair professional for assistance.
Pros and Cons of Samsung Dryer
Pros
- Innovative Features
- Large Capacity
- Energy Efficiency
- Design and Style
Cons
- Price
- Complexity.
- Durability
- Availability of Parts
Differences between Samsung dryers and Amana Dryers
Samsung
Samsung is a globally recognised brand known for its innovative technology and modern design. They offer a wide range of home appliances, including dryers, with an emphasis on advanced features and smart technology.
Amana
Amana, on the other hand, is a well-established American brand known for its simple and reliable appliances. Amana dryers typically focus on core functionality without extensive use of advanced technology.
Alternative to Samsung dryer
Whirlpool
Whirlpool is a well-established brand with a variety of dryer models, including both budget-friendly and high-end options.
Blinking Lights:
- Extra-low and 20-minute blinking lights: These lights signal a power source frequency error. You can attempt to resolve this issue by stopping and restarting the cycle. If that doesn't work, it may be due to insufficient power supply to the dryer.
- 80-minute light blinking: If you see this light blinking, it's possible that your dryer is not properly connected to a 240V outlet or is plugged into an extension cord. Check the power source to ensure it's suitable for your dryer.
The lint filter could be clogged.
A clogged lint filter or lint trap can be a common cause of a Samsung dryer not heating properly. Whether your dryer is producing minimal heat or no heat at all, clearing the lint from the filter is often the solution. Here's how to clean the lint filter effectively:
- Open the dryer door to access the lint filter.
- Lift the filter from the front of the dryer drum.
- Use your hands to remove lint and fuzz from the filter. You can also use a pipe cleaner or a vacuum to eliminate excess lint from the vent where you removed the filter.
- If the filter screen remains dirty, clean it with water by holding the filter under your sink faucet and gently rubbing away the dirt.
- Ensure the filter is completely dry before reinserting it into your dryer.
The dryer may not be getting enough power.
When setting up your Samsung dryer for the first time, it's essential to check the electrical outlet to ensure it meets the requirements for your dryer's operation. Here are the key points to consider:
- Voltage Requirement: Samsung dryers require a 240V outlet to provide the necessary power for heating the drum. If the outlet does not support the correct voltage, the dryer may still turn on, spin, and operate, but it will not produce heat.
- Error Codes: In cases where the power source is insufficient, you might encounter error codes like 9C1, 9E, 2E, or 9E1 on your dryer's display.
- Professional Assistance: If you are uncertain about the adequacy of your electrical outlet, it's advisable to consult an electrician. An electrician can perform voltage testing to determine if your outlet provides the required power for your Samsung dryer.
Read Also: Frigidaire Gallery Refrigerator Freezing Food
There could be a gas problem (gas dryers).
If your Samsung dryer uses gas for heating, it's essential to inspect the gas line to ensure proper operation. Here are the steps to check the gas line:
- Connection: First, verify that the gas line is securely connected to your dryer.
- Gas Valve: Check the gas valve to confirm that it's in the "on" position. If the gas switch is horizontal, it means the gas is off. Rotate it to the vertical position to turn it on.
- Gas Supply: As a precaution, it's a good idea to check other gas-powered elements in your home, such as your heating system and stove, to confirm if they are working correctly.
- Gas Metre: If you suspect a gas supply issue, check your gas meter to determine if there is a gas supply to your home. If you don't have gas in your home, it's not a problem with your dryer but rather an issue with your main gas line or supply.
The exhaust vent may have another problem
Exhaust vent problems can also lead to your Samsung dryer not heating correctly. If the dryer is unable to expel moisture through the vent, it will not be able to heat the drum properly. Here's how to inspect the exhaust vent on the back of your dryer for potential issues:
- Secure Attachment: Make sure the exhaust hose is securely attached to the back of the dryer and properly sealed. A loose or unsealed connection can lead to venting problems.
- Hose Material: Check the material of the exhaust hose. It should not be made of plastic, vinyl, or thin foil, as these materials are not suitable for venting. The best material for a dryer hose is rigid or semi-rigid metal, which helps maintain a clear and unobstructed airflow.
- Hose Length: Ensure that the length of the exhaust tube does not exceed the specifications outlined in your dryer's manual. If you do not have the manual, you can often find an online version on the manufacturer's website.
- Kinks and Bends: Examine the hose for any kinks, sharp bends, or flattening. A smooth, unobstructed path for the air to flow is crucial. Also, make sure the exhaust tube does not change directions too frequently, as this can hinder proper venting.
Conclusion
When your Samsung dryer is not heating, there are several potential culprits to investigate before seeking professional assistance. We've discussed various troubleshooting steps to help you identify and resolve the issue, ultimately saving you time and money.
From checking the power source and ensuring the gas line is properly connected to inspecting the exhaust vent for obstructions, these straightforward tasks can often resolve the problem and have your dryer functioning as it should.
By following these steps and maintaining your dryer's components, such as cleaning the lint filter and ensuring a clear and proper exhaust vent, you can maintain the efficient operation of your Samsung dryer and enjoy dry, warm laundry once more. If all else fails, don't hesitate to consult a professional technician for a more in-depth diagnosis and repair.
My name is Wisdom Bassey, I’m a blog content writer and graphic designer who provides support and services for brands and different companies. I’m young and versatile, A tech enthusiast. I carry out deep research on every topic I choose to write about. You can reach me through my social media handles, I’m always available and ready to connect.
The content is intended to augment, not replace, information provided by your clinician. It is not intended nor implied to be a substitute for professional medical advice. Reading this information does not create or replace a doctor-patient relationship or consultation. If required, please contact your doctor or other health care provider to assist you to interpret any of this information, or in applying the information to your individual needs.