(Kenmore Washer) Kenmore washing machines are preferred by many customers for valid reasons. These machines are known for their overall reliability, although they aren't entirely free of issues.
The positive aspect is that when problems do arise, they can often be resolved with relatively straightforward, do-it-yourself solutions.
Therefore, instead of incurring expenses for a professional repair service, you can refer to the information provided below to identify symptoms and learn how to address them in your Kenmore washing machine.
If the Kenmore washer won’t spin, check the following:
Lid Switch (Top Load Machine)
If the lid switch in your Kenmore washer is malfunctioning, it will result in the washer not spinning. This is an essential safety feature designed to prevent accidents when someone attempts to access the washer while it's in the midst of a spin cycle.
To determine if the lid switch is the issue, you can use a multimeter to test for continuity in the switch. If there is no continuity, it's advisable to replace the switch with a new one.
Drive Belt
The drive belt serves as the connection between the motor and transmission in your washing machine. Therefore, it's essential to inspect the drive belt and ensure it's properly tensioned.
If you find that the drive belt is loose on the pulley or has become damaged, you will need to either tighten the belt or replace it with a new one.
Motor Coupling (Top Load Machine)
The motor coupling is a component that links your washing machine's motor to the transmission. It has a safety feature that causes it to fail intentionally when the washer is overloaded, which helps protect both the motor and transmission from damage.
However, over time, normal wear and tear can also lead to the failure of the motor coupling. If you observe that the motor coupling is broken or malfunctioning, you'll need to replace it as part of the repair process.
Motor Control Board (Some Newer Models)
The motor control board is responsible for supplying power to the washer's motor. If this control board is defective, it can result in the washer not functioning correctly or not working at all.
To diagnose the issue, start by inspecting the board for any burned components. Additionally, you should verify that the board is effectively delivering power to the motor. If you discover that it's not sending power to the motor, you will need to replace the motor control board to resolve the problem.
Read Also: Kitchenaid Dishwasher control board troubleshooting
Transmission Clutch (Top Load Machine)
The clutch in your washing machine plays a crucial role in connecting the tub to the transmission. It helps the tub gradually reach the appropriate speed during the wash cycle.
However, if the clutch becomes worn out, it can impede the tub's ability to spin. It's important to note that the clutch is not a repairable component, and when it malfunctions, it must be replaced to restore the proper functioning of the washing machine.
Pros and Cons of Kenmore Washer
Pros
- Brand Reputation
- Wide Range of Models
- Energy Efficiency
- Innovative Features
Cons
- Price
- Limited Warranty
- Repair Costs
- Availability
Differences Between Kenmore Washers and Maytag Dryers
Kenmore
Kenmore is a brand primarily associated with Sears and Sears-affiliated stores, making its appliances widely available through these retail outlets. Maytag, on the other hand, is more widely available across various appliance retailers.
Maytag
Maytag is well known for its reputation for durable and reliable appliances, particularly its line of dryers. Maytag dryers are often praised for their performance and longevity.
Alternative to Kenmore Washer
Whirlpool
Whirlpool is known for its wide range of washing machines, offering different models with various features, sizes, and price points. They are known for their reliability and durability.
Rotor And Stator Assembly
The rotor and stator in your washing machine function in tandem to generate a powerful electromagnetic field capable of spinning the tub in both clockwise and anticlockwise directions.
In some cases, the magnets within the rotor may become damaged, leading to the washer's inability to spin. To address this issue, it is necessary to access this component and carefully examine it for any signs of damage, which will help determine whether a replacement is needed.
Similarly, the stator houses windings that are susceptible to damage over time. By inspecting these windings for any defects, you can ascertain whether the stator requires replacement to restore the proper functioning of the washing machine.
If the Kenmore washer makes loud noises, check:
Drum Bearing
In the centre of the outer tub, you'll find a bearing that plays a crucial role in ensuring the inner tub spins smoothly during the wash cycle.
Replacing this bearing is a relatively complex repair, and many experts recommend replacing both the bearing and the outer tub simultaneously. This comprehensive approach is often suggested to ensure the washer's optimal performance.
A common problem associated with a worn-out bearing is the deterioration of the bearing seal, which can lead to water leakage issues in the washing machine.
Drive Pulley
If the drive pulley in your washing machine becomes cracked, bent, loose, or worn out, it can result in loud and disruptive operations. To address this issue, you should remove the drive pulley from the machine and thoroughly inspect it.
If you observe any defects or damage in the drive pulley, it is necessary to replace it to eliminate the noise and restore the proper functioning of your washer.
Drive Belt
As time passes, drive belts in washing machines can wear out, and when this happens, they are prone to breaking, which can lead to noisy operation of the machine.
To address this issue, it's essential to visually examine the drive belt. If you find that the belt is broken or shows signs of significant wear, it is advisable to replace it. This replacement will help eliminate the loud noises and maintain the washer's proper performance.
Drain Pump
When your washing machine produces a loud noise during the draining process, the likely culprit is the drain pump. The noise may indicate that the pump is either clogged or faulty.
To diagnose this issue, you should access the drain pump and ensure it's clear of any debris. If the pump is free from debris but continues to make noise, it's a sign that the pump is malfunctioning, and in such cases, it will be necessary to replace the drain pump to resolve the problem.
Conclusion
Maintaining and troubleshooting your Kenmore washing machine can be a cost-effective and practical approach when issues arise. By identifying and addressing common problems such as those related to the lid switch, drive belt, motor coupling, motor control board, clutch, rotor, stator, bearing, drive pulley, and drain pump, you can often resolve issues and restore your washer to proper working condition.
Regular inspections and timely replacements, when necessary, can help extend the lifespan of your appliance and ensure it continues to serve your laundry needs efficiently.
Remember that safety precautions should always be taken when performing any DIY repairs, and if you're unsure or uncomfortable with the process, consulting a professional technician may be the best course of action.
My name is Wisdom Bassey, I’m a blog content writer and graphic designer who provides support and services for brands and different companies. I’m young and versatile, A tech enthusiast. I carry out deep research on every topic I choose to write about. You can reach me through my social media handles, I’m always available and ready to connect.
The content is intended to augment, not replace, information provided by your clinician. It is not intended nor implied to be a substitute for professional medical advice. Reading this information does not create or replace a doctor-patient relationship or consultation. If required, please contact your doctor or other health care provider to assist you to interpret any of this information, or in applying the information to your individual needs.