You must manually reset the water filter status each time you replace the filter, as it typically doesn’t reset automatically on most models. To reset the water filter status indicator, the procedure varies depending on your refrigerator model and type, and it is advisable to refer to your owner’s manual for precise instructions tailored to your specific model.
Sometimes, on Whirlpool refrigerators, the water filter light may illuminate in orange, even if a water filter is installed. While this doesn’t indicate any issues, it can be a bit bothersome. To reset the light, follow these steps: Find the water filter button and press and hold it for 3 seconds.
To maintain the water filter and ensure optimal performance, it’s important to:
- Change the water filter regularly, as recommended by the manufacturer.
- Use genuine Whirlpool filters designed for your refrigerator model.
- Schedule periodic servicing by a Whirlpool technician to ensure the overall health of your fridge and its components.
By following these steps, you can keep your Whirlpool refrigerator in good working condition and ensure your water filter functions as intended.
- In some models, the status light will automatically reset once you’ve installed the new filter.
- However, for other models, you may need to follow a manual reset process.
How do I reset the water filter status light?
Type 1:
Upon replacing the filter, simultaneously press the MAX COOL and MAX ICE buttons for 3 seconds to reset the water filter. You’ll observe a 3-second countdown on the display, followed by the icon flashing and a tone playing.
Type 2:
After changing the filter, reset the filter status light by pressing and holding the “FILTER RESET” button. The status light will deactivate once the system is reset.
Read Also: Water Dispenser not working on Samsung fridge
Type 3:
Following the replacement of the water filter, reset the status by pressing and holding the “WATER FILTER” button for 3 seconds. When the system is reset, the water filter icon will revert to its blue colour, and the “Replace Filter” message will disappear from the display.
Type 4:
After changing the water filter, reset the status by pressing the “OPTIONS” button, then “FILTER RESET,” and finally “MEASURED FILL” to confirm. The status light will go off once the system is reset.
Type 5:
To reset the filter status light after replacing the filter, press and hold the LIGHT and ICE TYPE buttons together for 3 seconds. The status light will deactivate upon resetting the system.
Pros and Cons of Whirlpool
Pros
- Reliability
- Wide Range of Products
- Innovative Features
- Energy Efficiency
Cons
- Price
- Complex Features
- Noisiness
- Limited Aesthetics
Differences Between Whirlpool and Kenmore
Whirlpool
Whirlpool is a well-established appliance manufacturer that produces its own appliances and is known for its innovation and technology.
Kenmore
Kenmore is a brand owned by Sears Holdings (now Transform Holdco), and its appliances are manufactured by various companies, including Whirlpool, LG, and others. Kenmore appliances often feature a mix of technologies and designs from different manufacturers.
Alternative to Whirlpool
Sub-Zero and Wolf
Sub-Zero is renowned for its high-end refrigeration products, while Wolf specialises in cooking appliances. Both brands are known for their quality and performance.
When should you replace your water filter?
It is advisable to replace the water filter at regular intervals, typically every 6 months, when the indicator light signals or when you perceive a need for it. If the water filter becomes clogged or is improperly installed, it can impede water flow to the ice maker and dispenser, potentially resulting in issues like small ice cubes, reduced ice production, or longer dispensing times.
If the filter becomes clogged and you cannot replace it right away, you can remove the filter, which will place the water system in bypass mode. With the filter removed, the water system will continue to function without filtering, preventing slow water dispensing or low ice production caused by a clogged filter. However, to enjoy filtered water, you will eventually need to install a new filter.
Please note that experiencing one or two drops of water immediately after dispensing is normal. In some cases, it may be necessary to keep the container under the dispenser for an additional 2 to 3 seconds after releasing the dispenser button.
Refrigerator with an Indicator Light
You should replace the water filter when the filter status light or indicator, typically found on the temperature control panel, signals that a filter change is required. For more specific instructions and the precise location of your filter status light or indicator, please refer to your owner’s manual.
Refrigerator without an Indicator Light
In the absence of a filter status light or indicator, it is recommended to replace the water filter at intervals of approximately 6 to 9 months. However, if you observe a noticeable reduction in water flow to the water dispenser or ice maker before the 6-month mark, it may be necessary to replace the water filter cartridge more frequently. This decrease in water flow is an indication that the filter has become clogged and requires replacement.
Conclusion
Maintaining the water filter in your refrigerator is crucial for ensuring the quality of water and ice. Whether guided by a filter status light or on a 6- to 9-month schedule, regularly replacing the filter is essential.
When the filter is clogged or water flow diminishes significantly, timely replacement is necessary to prevent issues with water and ice production. Always refer to your owner’s manual for specific instructions and details related to your particular refrigerator model.
My name is Wisdom Bassey, I’m a blog content writer and graphic designer who provides support and services for brands and different companies. I’m young and versatile, A tech enthusiast. I carry out deep research on every topic I choose to write about. You can reach me through my social media handles, I’m always available and ready to connect.
The content is intended to augment, not replace, information provided by your clinician. It is not intended nor implied to be a substitute for professional medical advice. Reading this information does not create or replace a doctor-patient relationship or consultation. If required, please contact your doctor or other health care provider to assist you to interpret any of this information, or in applying the information to your individual needs.